(5) Disconnect the Connector (CN3) of the Registration front/rear sensor harness ASSY from
the HVPS control PCB ASSY.
Side frame R
HVPS control PCB ASSY
CN3
(6) Remove the three Taptite cup S M3x6 SR screws and two Shoulder screws, and then
remove the Paper feed unit from the Main body.
Paper feed unit
Registration front/rear sensor
harness ASSY
Fig. 5-184
Main body
<Front>
Fig. 5-185
5-149
<Right side>
Shoulder screw
Taptite cup S M3x6 SR
Confidential