Engine Pcb Assy - Brother MFC-9320CW Service Manual

8.55 Engine PCB ASSY

(1) Disconnect the eleven connectors (CN1, CN2, CN4, CN6, CN7, CN8, CN9, CN10, CN11,
CN14, CN15) and one flat cable (CN3) from the Engine PCB ASSY.
Note:
- After disconnecting the flat cable(s), check that each cable is not damaged at its end
or short-circuited.
- When connecting the flat cable(s), do not insert it at an angle. After insertion, check
that the cable is not at an angle.
(2) Remove the four Taptite cup S M3x6 SR screws, and then remove the Engine PCB ASSY
from the Side frame L.
Side frame L
Taptite cup S M3x6 SR
<Left side>
CN13
CN11
CN10
CN9
CN8 CN7 CN6
Fig. 5-159
Fig. 5-160
5-134
Engine PCB ASSY
CN14 CN15
CN1
CN2
CN3
CN4
CN5
Engine PCB ASSY
Confidential