Brother MFC-9320CW Service Manual page 473

Memo:
Although adjustment of color registration (auto) is executed several times and the result of
color registration adjustment chart
it according to the following procedures.
<Operating procedure>
1) Press the 6 button twice in the initial state of the maintenance mode.
"REGISTRATION" is displayed on the LCD. Load A4-size paper on the tray.
2) Press the
OK button.
3) Display "PRINTING" on the LCD, and print the color registration adjustment chart.
After printing, "PRINT CHART" is displayed again.
4) Press the
the OK button. "4. MAGENTA = 0" is displayed on the LCD.
5) With the printed color registration adjustment chart, check the numeric value where
the color is the darkest among the pattern
button to display that numeric value, and then press the Start/Black button.
6) Enter the numeric value of the patterns
7) When you enter the numeric value of the pattern
is displayed.
8) Press the Stop/Exit button to return to the machine to the initial state of the
maintenance mode.
■ Adjustment of color registration (manual)
<Operating procedure>
(1) Press the 6 button twice in the initial state of the maintenance mode.
"REGISTRATION" is displayed on the LCD. Load A4-size paper on the tray.
(2) Press the or
(3) Display "PRINTING" on the LCD, and print the color registration adjustment chart
page). After printing, "PRINT CHART" is displayed again.
(4) Press the or
OK button. "1. M LEFT/0" is displayed on the LCD.
(5) With the printed color registration adjustment chart, check the numeric value where the
color is the darkest among the pattern
display that numeric value, and then press the Start/Black button.
(6) Enter the numeric value of the patterns
(7) When you enter the numeric value of the pattern
REGISTRATION/COMPLETED" is displayed.
(8) When the Stop/Exit button is pressed, the machine beeps for one second and returns to
the initial state of the maintenance mode.
(Next page) does not fall within the range of
or button to display "PRINT CHART" on the LCD, and then press the
or button to display "OFFSET ADJUST" on the LCD, and then press
button to display "PRINT CHART" on the LCD, and then press the OK button.
button to display "OFFSET ADJUST" on the LCD, and then press the
7-32
(Magenta Center). Press the
4
to in the same way.
5 6
(Yellow Center), "COMPLETED"
6
(Magenta Left). Press the
1
to in the same way.
2 9
(Yellow Right), "SET
9
±
4, readjust
or
(Next
or button to
Confidential