Camshaft Installation - KYMCO Agility City 125 Service Manual

Cortesia de / Courtesy of: www.batmotos.com
7
. CYLINDER HEAD/VALVES

CAMSHAFT INSTALLATION

Turn the flywheel so that the "T" mark on the
flywheel aligns with the index mark on the
crankcase.
Keep the round hole on the camshaft gear
facing up and align the punch marks on the
camshaft gear with the cylinder head surface
(Position the intake and exhaust cam lobes
down.) and install the camshaft onto the
cylinder head.
Install the cam chain over the camshaft gear.
Install the dowel pins.
Install the camshaft holder, washers and nuts
on the cylinder head.
Tighten the four cylinder head nuts and two
bolts.
Torque: Cylinder head nut: 2.0kg-m
Apply engine oil to the threads of the
cylinder head nuts.
Diagonally tighten the cylinder head
nuts in 2 3 times.
Adjust the valve clearance.
Turn the cam chain tensioner screw counter-
clockwise to release it.
Recambios KYMCO en www.batmotos.com
Cam Chain
Round Hole
Dowel Pins
Nut
Camshaft Holder
Washer
Tensioner Screw
AGILITY CITY 125
Camshaft Gear
Punch Marks
7-10