KYMCO Agility City 125 Service Manual page 109

Cortesia de / Courtesy of: www.batmotos.com
9. DRIVE AND DRIVEN PULLEYS/
KICK STARTER
INSTALLATION
Install the kick starter spindle bushings and
return spring onto the left crankcase cover.
When installing the return spring, use a
screw driver to press the inward and
outward return spring hooks into their
original positions respectively.
Install the starter driven gear and friction
spring as the figure shown.
Install the kick lever.
Install the left crankcase cover and tighten the
cover bolts diagonally.
Connect the drive belt air tube and tighten the
band screw.
For drum brake, be sure to install the rear
brake cable clamp to the specified location
and install the brake cable into the brake
cable holder.
9-15
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Kick Starter Spindle
Friction Spring
Starting Ratchet
Left Crankcase Cover
Rear Brake Cable Clamp