KYMCO Agility City 125 Service Manual page 145

Cortesia de / Courtesy of: www.batmotos.com
13
. REAR WHEEL/REAR BRAKE/
REAR SUSPENSION
REAR WHEEL
REMOVAL
Remove the exhaust muffler. ( 2-5)
Remove the rear axle nut and rear shock
absorber bolt.
Remove the rear axle side collar and rear
fork.
Remove the rear wheel.
.
INSPECTION
Measure the rear wheel rim runout.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
Inspect the rear brake drum.
Measure the rear brake drum I.D.
Service Limits: 130mm replace if over
INSTALLATION
Install the rear wheel in the reverse order of
removal.
Tighten the rear axle nut.
Torque: 11.0-13.0kg-m
Install the exhaust muffler.
Torque:
Exhaust muffler joint lock nut: 1.0~1.4kgf-m
Exhaust muffler lock bolt: 3.0~3.6kgf-m
First install and tighten the exhaust
muffler joint lock nuts and then the
exhaust muffler lock bolts.
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Rear Shock Absorber Bolt
Rear Axle Nut
Lock Bolts
Rear Fork
Joint Lock Nuts
13-2