KYMCO Agility City 125 Service Manual page 115

Cortesia de / Courtesy of: www.batmotos.com
10
. FINAL REDUCTION
Install the countershaft and gear into the left
crankcase.
Install the dowel pins and a new gasket.
Install the transmission case cover.
Install and tighten the transmission case cover
bolts.
Install the clutch/driven pulley. ( 9-13)
After installation, fill the transmission case
with the specified oil. ( 3-7)
Place the motorcycle on its main stand
on level ground.
Check the oil sealing washer for wear
or damage.
Specified Gear Oil: SAE90#
Oil Capacity:
At disassembly : 0.2 liter
At change
Install and tighten the oil check bolt.
Torque: 0.8 1.2kgf-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt
hole and add the specified oil to the proper
level if the oil level is low.
10-5
Recambios KYMCO en www.batmotos.com
: 0.18 liter
AGILITY CITY 125
Gasket
Transmission Case Cover
Bolts
Drain Bolt
Oil Check Bolt Hole/Oil Filler
Countershaft
Dowel Pins