Engine Installation - KYMCO Agility City 125 Service Manual

Cortesia de / Courtesy of: www.batmotos.com
6
. ENGINE REMOVAL/INSTALLATION
Inspect the engine hanger bushings and
stopper rubbers for wear or damage.
ENGINE HANGER BRACKET
INSTALLATION
Install the engine hanger bracket to the
engine.
Install the engine hanger bracket bolt and
tighten the nut.

ENGINE INSTALLATION

Install the engine and tighten the engine
mounting bolt.
Torque: 7.0kg-m
Tighten the rear shock absorber upper
mount bolt.
Torque: 4.0kg-m
Install the removed parts in the reverse
order of removal.
Route the wires and cables properly.
After installation, inspect and adjust the
following:
Throttle grip free play.
Rear brake adjustment.
Recambios KYMCO en www.batmotos.com
Bushings
Bolt
Nut
Rear Shock Absorber Lower Mount Bolt
AGILITY CITY 125
Stopper Rubbers
Nut
Engine Hanger Bracket
Engine Mounting Bolt
6-4