KYMCO Agility City 125 Service Manual page 9

Cortesia de / Courtesy of: www.batmotos.com
1
. GENERAL INFORMATION
Route harnesses so they are neither
pulled tight nor have excessive slack.
.
Protect wires and harnesses with electrical
tape or tube if they contact a sharp edge or
corner
When rubber protecting cover is used to
protect the wire harnesses, it shall be
installed securely.
Do not break the sheath of wire.
If a wire or harness is with a broken sheath,
repair by wrapping it with protective tape
or replace it.
When installing other parts, do not press or
squeeze the wires.
1-8
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Do not pull
too tight!
Do not press or
squeeze the wire.