KYMCO Agility City 125 Service Manual page 134

Cortesia de / Courtesy of: www.batmotos.com
12
. FRONT WHEEL/FRONT BRAKE/
FRONT SUSPENSION
Disassembly
Remove the brake caliper seat from the brake
caliper.
Remove the piston from the brake caliper.
If necessary, use compressed air to squeeze
out the piston through the brake fluid inlet
opening and place a shop towel under the
caliper to avoid contamination caused by the
removed piston.
Check the piston cylinder for scratch or wear
and replace if necessary.
Push the piston oil seal outward to remove it.
Clean the oil seal groove with brake fluid.
Be careful not to damage the piston
surface.
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Brake Caliper Seat
Compressed Air
Piston Oil Seal
12-12