KYMCO Agility City 125 Service Manual page 158

Cortesia de / Courtesy of: www.batmotos.com
14
. BATTERY/CHARGING SYSTEM/
A.C. GENERATOR
Remove the A.C. generator wire set plate.
Remove the pulser coil bolts.
Remove the A.C. generator wire rubber
sleeve and pulser coil from the right
crankcase.
Remove the two bolts and A.C. generator
stator.
A.C. GNERATOR INSTALLATION
A.C. Generator Wire
Rubber Sleeve
Install the A.C. generator stator and pulser
coil onto the right crankcase.
Tighten the stator and pulser coil bolts.
Torques: Pulser Coil : 0.45~0.6kgf-m
Stator
Install the A.C. generator wire rubber sleeve
and A.C. generator wire set plate.
Recambios KYMCO en www.batmotos.com
Woodruff Key
Stator
: 0.8~1.2kgf-m
AGILITY CITY 125
Bolts
Bolts
Flywheel
5.5kg-m
Cooling Fan
0.5kg-m
Bolts
Fan Cover
0.9kg-m
Bolts
14-8