KYMCO Agility City 125 Service Manual page 164

Cortesia de / Courtesy of: www.batmotos.com
15
. IGNITION SYSTEM
CDI UNIT INSPECTION
Remove the two battery cover screws.
Disconnect the CDI coupler and remove the
CDI unit.
Measure the resistance between the terminals
using the electric tester.
Due to the semiconductor in circuit, it is
necessary to use a specified tester for
accurate testing.
tester in an improper range may give
false readings.
In this table, "Needle swings then
returns" indicates that there is a charging
current applied to a condenser. The needle
will then remain at "
condenser is discharged.
15-3
Recambios KYMCO en www.batmotos.com
Use of an improper
" unless the
Green/
Black
Violet/ Black
AGILITY CITY 125
CDI
Black/ Yellow
Green
Blue / Yellow
Black/ Red
Violet/Red
Black / Blue