Cortesia de / Courtesy of: www.batmotos.com
7
. CYLINDER HEAD/VALVES
CYLINDER HEAD REMOVE
Remove the camshaft.
Remove the carburetor.
Remove the exhaust muffler.
Remove the carburetor intake manifold.
Remove the cooling fan cover.
Remove the engine cover bolts and screws.
Separate the engine cover joint claws.
Remove the cylinder head.
Remove the dowel pins and cylinder head
gasket.
Remove the cam chain guide.
Remove all gasket material from the
cylinder mating surface.
Avoid damaging the cylinder mating
surface.
Be careful not to drop any gasket
material into the engine.
Recambios KYMCO en www.batmotos.com
Intake Manifold
Cylinder Head
Dowel Pins
AGILITY CITY 125
Bolts
Cylinder Head Gasket
Cam Chain Guide
7-6