Camshaft Installation - KYMCO SUPER8 50 Service Manual

7. CYLINDER HEAD/VALVES
Install the cylinder head.
CAMSHAFT HOLDER ASSEMBLY
First assemble the camshaft holder.
Install the intake and exhaust valve rocker
arms and rocker arm shafts.
• When installing the rocker arm shaft,
align the shaft front end with the bolt
hole of the camshaft holder.

CAMSHAFT INSTALLATION

Turn the flywheel so that the "T" mark on the
flywheel aligns with the index mark on the
crankcase.
Keep the round hole on the camshaft gear
facing up and align the punch marks on the
camshaft gear with the cylinder head surface
(Position the intake and exhaust cam lobes
down.) and install the camshaft onto the
cylinder head.
Install the cam chain over the camshaft gear.
Install the dowel pins.
7-9
Cylinder Head
Camshaft Holder
Cam Chain
Round Hole
Dowel Pins
SUPER8 50
Valve Rocker Arm
Camshaft Gear
Punch Marks