Cortesia de / Courtesy of: www.batmotos.com
10
. FINAL REDUCTION
BEARING REPLACEMENT (LEFT
CRANKCASE)
Remove the drive shaft.
Remove the drive shaft oil seal.
Remove the left crankcase bearings using a
bearing puller.
Special
Bearing Puller
Drive new bearings into the left crankcase.
Install a new drive shaft oil seal.
FINAL REDUCTION ASSEMBLY
Install the drive shaft into the left crankcase.
Install the final gear and final shaft into the
left crankcase.
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Bearing Puller, 12mm
Pilot
Drive Shaft
10-4