KYMCO Agility City 125 Service Manual page 31

Cortesia de / Courtesy of: www.batmotos.com
2
. FRAME COVERS/EXHAUST MUFFLER
FRAME BODY COVER REMOVAL
Remove the two screws on the battery cover.
Remove the battey cover
Remove the six screws on the center cover
Remove the center cover
Remove the three bolts attaching the rear
carrier.
Remove the rear carrier.
Remove the two bolt attaching the lefe and
right rear step.
Remove the rear step
Remove the six screws attaching the left side
and right side skirt
Remove the left side and right side skirt
During removal, do not pull the joint
claws forcedly to avoid damage.
When installing, be sure to connect the
seat lock wire.
2-3
Recambios KYMCO en www.batmotos.com
Battery Cover
Screws
Center Cover
Bolts
Rear Step
Bolts
Screws
AGILITY CITY 125
Screws
Rear Carrier
Left Side Skirt
Right Side Skirt