KYMCO Agility City 125 Service Manual page 33

Cortesia de / Courtesy of: www.batmotos.com
2
. FRAME COVERS/EXHAUST MUFFLER
Discornnect the seat lock wire.
Discornnect the rear light wire connectors
Remove the left / right body cover and rear
light.
The installation sequence is the reverse of
remove
During removal, do not pull the joint
claws forcedly to avoid damage.
When installing, be sure to connect the
seat lock wire.
FLOOR BOARD REMOVAL
Remove the rear carrier. ( 2-3)
Remove the met-in box. ( 2-3)
Remove the frame body cover. ( 2-4)
Remove the four bolts attaching the floor
board.
Remove the floor board.
FRONT FENDER REMOVAL
Remove the L/R side bolts attaching the front
fender and front fender.
LEG SHIELD REMOVAL
Remove the two clip body on the lid leg
shield
Remove the lid leg shield.
The installation sequence is the reverse of
remove
2-5
Recambios KYMCO en www.batmotos.com
AGILITY CITY 125
Rear Light Wire
Seat Lock Wire
Lift Body Cover
Plug Floor/Bolts
Floor Board.
Bolts
Clip Body.
Connector
Rear Light
Screws
Front Fenderl
Lid Leg Shield.