Aastra 6731i User Manual page 130

Managing Calls
• Phone - The Phone mode allows you to set the same CFWD configuration for all accounts (All, Busy, and/or No
Answer). When you configure the initial account, the phone applies the configuration to all other accounts. (In the
Aastra Web UI, only the account you configured is enabled. All other accounts are grayed out but set to the same con-
figuration.) Using the Aastra Web UI, if you make changes to that initial account, the changes apply to all accounts on
the phone.
• Custom - The Custom mode allows you to configure CFWD for a specific account or all accounts. You can configure a
specific mode (All, Busy, and/or No Answer) for each account independently or all accounts. On the 6731i, you can set
all accounts to ALL On or ALL Off.
Note:
If there is only one account configured on the phone, then the mode setting is ignored and the phone behaves as if the
mode was set to "Phone".
You can enable different CFWD rules/modes independently (for example, you can set different phone numbers for Busy,
All, and NoAns modes and then turn them on/off individually).
The following table describes the key and Message Waiting Indicator (MWI) LEDs when you enable CFWD on the IP
Phone.
Key LED Behavior for All Modes
CFWD key LED RED if CFWD All, CFWD Busy, or
CFWD No Answer is enabled for the account in
focus.
CFWD key LED OFF if any CFWD mode is disa-
bled.
Note:
If you make changes to the configuration for CFWD via the IP Phone UI, you must refresh the Aastra Web UI screen to see
the changes.
124
MWI LED Behavior for All Modes
MWI LED ON if current account in
focus has CFWD ALL enabled.
MWI LED OFF if CFWD All is disa-
bled.
41-001387-00 Rev 01 – 06.2013