Aastra 6731i User Manual page 108

Handling Calls
IP Phone UI
Using Local Conferencing in Pre-Dial Mode
Use the following procedure to create a conference call using local conferencing in pre-dial mode. Use the following
illustration as a reference:
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
4. Press the Conf key . You will not hear a dial tone before the dialing begins.
5. Enter the phone number of Party 3.
Note:
Users are able to edit the destination number ("Backspace" softkey is provided and navigation key is functional to
move the cursor to the desired location).
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the conference.
7. Press the Conf key again to add Party 3 to the conference. Party 1 (which is yourself ), Party 2, and Party 3 are
all connected to a single conference.
8. To drop a party from the conference, use the navigation key to select the party and press the Drop key.
Using Local Conferencing in Live Dial Mode
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
speakerphone key. A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to the conference.
102
2
=Dial
Conference
Key
41-001387-00 Rev 01 – 06.2013