Aastra 6731i User Manual page 110

Handling Calls
Reference
For more information on Centralized Conferencing, see
Administrator.
Using Centralized Conferencing
IP Phone UI
Note:
When Centralized Conferencing is enabled on your phone, local conferencing (or three-way conferencing) works as
indicated in the previous section,
also works as indicated in the previous section,
Use the following procedure to create a conference call using centralized conferencing. Use the following illustration as a
reference:
Setting Up a Conference and Adding Multiple Parties (for Sylantro and Broadsoft Servers)
Note:
You can have an unlimited number of parties in a conference (dependent on the limitations of the server.
1. When you begin a conference, you are the first party in the conference (Party 1). Pickup the handset or press the
Speakerphone Key.
A line opens up.
2. Call Party 2 by dialing their number (or answer an incoming call of a Party).
3. Wait for Party 2 to answer. When Party 2 answers, you can consult with them before adding them to Conference 1.
4. Press the Conf Key . A new line opens.
5. Enter the phone number of Party 3.
6. Wait for Party 3 to answer. When Party 3 answers, you can consult with them before adding them to the Conference 1.
7. Press the Conf Key again to add Party 3 to Conference 1. Party 1 (which is yourself ), Party 2, and Party 3 are all
connected to Conference 1.
104
"Centralized Conferencing"
"Using Local Conferencing in Pre-Dial Mode. "
"Joining Two Active Calls in a Single Conference. "
2
=Dial
on page 156 or contact your System
Joining two active calls in a conference
Conference
Key
41-001387-00 Rev 01 – 06.2013