Aastra 6731i User Manual page 106

Handling Calls
Completing a Transfer to a Contact in Phone Directory
Users can complete a blind transfer to a contact in their local directory. If a user is in a call and initiates a transfer, they can
navigate to the Directory screen and press the Transfer key again to trigger a blind transfer. There is no change to start a
consultative call.
To Transfer a Call to a Contact in the Phone Directory:
Connect to Party 1 (if not already connected). Party 1 is the party you want to
1.
transfer.
Press the Transfer key
2.
3. Press the Directory key and select a contact.
4. To complete a "blind" transfer, press the Transfer key
To complete a consultative transfer, press Dial to call the contact. Remain on the line to speak with Party
2 before pressing the Transfer key again to transfer Party 1 to Party 2.
To cancel the transfer, select Cancel on the display screen or press the Goodbye key.
Indication of Transferred Calls
When you transfer an active call, the near-end phone displays a Call Transferred screen when a call is transferred and the
far-end call is dropped. The following is the Call Transferred screen on the 6731i phone:
The following procedure describes how to handle the Call Transferred screen on your phone.
IP Phone UI
1. Press the Goodbye
The Call Transferred screen no longer displays.
or
Select any Line key.
The Call Transferred screen no longer displays and is replaced by a dial screen.
100
. You should hear a dial tone as a second line opens up.
:
Call Transferred
key.
again before the receiving end answers.
41-001387-00 Rev 01 – 06.2013