AXIOMTEK SBC81203 Series User Manual page 49

applications/files is saved to main memory that remains
powered while most other hardware components turn off to
save energy. The information stored in memory will be used to
restore the system when a "wake up" event occurs.
Power Management
This option allows you to select the type of power Management.
Options: APM, ACPI.
Video Off Method
This setting determines the manner in which the monitor is blanked.
It turns OFF vertical and horizontal synchronization
V/H
ports and writes blanks to the video buffer.
SYNC+Blank
Select this option if your monitor supports the Display
DPMS
Power Management Signaling (DPMS) standard of the
Video Electronics Standards Association (VESA). Use
the supplied software for your video subsystem to select
video power management values.
The System only writes blanks to the video buffer.
Blank Screen
Video Off In Suspend
This item defines if the video is powered down when the system is
put into suspend mode.
Suspend Type
If this item is set to the default Stop Grant, the CPU will go into Idle
Mode during power saving mode.
Suspend Mode
After the selected period of system inactivity (1 minute to 1 hour),
all devices except the CPU shut off. The default value is "Disabled".
Disabled System will never enter SUSPEND mode
Defines the continuous idle time before the system
entering SUSPEND mode.
1/2/4/6/8/10/
If any item defined in (J) is enabled & active,
20/30/40
SUSPEND timer will be reloaded
Min/1 Hr
HDD Power Down
If HDD activity is not detected for the length of time specified in this
field, the hard disk drive will be powered down while all other
devices remain active.
Award BIOS Utility
SBC81203 LGA775 SBC User's Manual
43