AXIOMTEK SBC81203 Series User Manual page 41

Enabled
Disabled
First/Second/Third Boot Device
These items let you select the 1
system will search for during its boot-up sequence. The wide range
of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI, and
CDROM.
Boot Other Device
This item allows the user to enable or disable the boot device not
listed in the First/Second/Third boot devices option above. The
default setting is "Enabled".
Swap Floppy Drive
This item allows you to determine whether to enable Swap Floppy
Drive or not. When enabled, the BIOS swap floppy drive assignment
makes Drive A become Drive B, and vice versa. The default setting
is "Disabled".
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive type, 40 or
80 tracks. The 360Kb type is 40 tracks while 720Kb, 1.2MB and
1.44MB are all 80 tracks. The default value is "Enabled".
BIOS searches for floppy disk drive to determine if it is
40 or 80 tracks. Please be noted BIOS can not
Enabled
differentiate 720K, 1.2M or 1.44M drive type as they all
are 80 tracks.
BIOS will not search for the type of floppy disk drive by
Disabled track number. There will be no warning message
displayed if the installed drive is 360K.
Boot Up NumLock Status
Set the the Num Lock status when the system is powered on.
The default value is "On".
Security Option
This item allows you to limit access to the system and Setup, or just
to Setup. The default value is "Setup".
Award BIOS Utility
SBC81203 LGA775 SBC User's Manual
Enable Quick POST
Normal POST
st nd rd
, 2 , and 3 devices that the
35