Auxiliary Interface Kit - Xerox WorkCentre 7800 Series System Administrator Manual

Auxiliary Interface Kit

An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
At the printer control panel, press the Machine Status button, then touch the Tools tab.
1.
2. Touch Accounting Settings.
Touch Accounting Mode > Auxiliary Access.
3.
4. Touch Auxiliary Device Type and select your printer type.
5. Touch Save twice.
See also:
Accounting on page 199
Local Authentication on page 68
Customization and Expansion
WorkCentre 7800 Series Multifunction Printer
System Administrator Guide
245