Customization and Expansion
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface kit, is a third-party access and accounting
device such as a coin operated printer accessory or a card reader that can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit. After the kit is installed, you
must enable and configure the device at the control panel.
To configure Accounting/Billing Device settings, see
Accounting and Billing Device Settings
on
page 135.
To configure accounting, see
Accounting
on page 127.
To configure authentication, see
Local Authentication
on page 49.
WorkCentre 5300 Series Multifunction Printer
159
System Administrator Guide