Customization and Expansion
Auxiliary Interface Kit
An Auxiliary Interface Kit, or a Foreign Device Interface kit, is a third-party access and accounting
device such as a coin operated printer accessory or a card reader that can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit. After the kit is installed, you
must enable and configure the device at the control panel.
To configure Accounting/Billing Device settings, see
page 135.
To configure accounting, see
To configure authentication, see
160
WorkCentre 7120/7125 Multifunction Printer
System Administrator Guide
Accounting
on page 127.
Local Authentication
Accounting and Billing Device Settings
on page 49.
on