Auxiliary Interface Kit - Xerox WorkCentre 7970 System Administrator Manual

Auxiliary Interface Kit

An Auxiliary Interface Kit, or a Foreign Device Interface Kit, is a third-party access and accounting device.
These kits, such as a coin operated printer accessory or a card reader, can be attached to the printer.
Installation instructions are included with the Foreign Device Interface Kit.
1. At the printer control panel, press the Machine Status button, then touch the Tools tab.
Touch Accounting Settings.
2.
3. Touch Accounting Mode>Auxiliary Access.
Touch Auxiliary Device Type and select your device type.
4.
5. Touch Save twice.
See also:
Accounting on page 207
Local Authentication on page 70
® ®
Xerox WorkCentre 7970 Multifunction Printer
System Administrator Guide
Customization and Expansion
255