Installing Optional Software Features - Xerox WorkCentre 7800 Series System Administrator Manual

Installing Optional Software Features

When you purchase an optional software feature, enable it by providing a feature installation key. Some
features come with an activation code that you use to get a feature installation key. Go to the Xerox
Software Activation Portal website at
website generates a feature installation key that you can use to enable the feature.
You can also install optional software features by sending a print file. You can install features on
multiple printers by sending a formatted .csv file as a print job to the printers. A Xerox representative
creates this file and provides installation instructions.
Installing a Software Feature at the Control Panel
At the printer control panel, press the Machine Status button, then touch the Tools tab.
1.
2. Touch Device Settings > General > Feature Installation.
Click Feature Installation.
3.
4. Under Feature Installation Key Entry, type the key.
Touch OK.
5.
www.xeroxlicensing.xerox.com
WorkCentre 7800 Series Multifunction Printer
to enter the activation code. The
System Administrator Guide
Initial Setup
®
21