Table of Contents
Advertisement
The Page includes the following fields:
Object
Image
Version
Date
Buttons
4.2.26 Factory Default
You can reset the configuration of the Industrial Managed Switch on this Page. Only the IP configuration is retained. The new
configuration is available immediately, which means that no restart is necessary. The Factory Default screen in
appears.
Figure 4-2-30: Software Image Selection Page Screenshot
Description
The flash index name of the firmware image. The name of primary (preferred)
image is image, the alternate image is named image.bk.
The version of the firmware image.
The date where the firmware was produced.
: Click to use the alternate image. This button may be disabled depending on system state.
Figure 4-2-31: Factory Default Page Screenshot
User's Manual of IGS-20040MT
83
Figure 4-2-31
Advertisement
Table of Contents
