Ptp Status - Planet IGS-20040MT User Manual

'P' constant
 'I' constant
'D' constant
Unicast Slave Configuration
Object
 Duration
 Ip-address
 grant
 Comm State
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.

4.18.2 PTP Status

This Page provides a status overview for PTP status. The PTP Status screen in
[1..1000] see above
[1..1000] see above
[1..1000] see above
Description
The number of seconds a master is requested to send Announce/Sync
messages. The request is repeated from the slave each Duration/4 seconds.
IPv4 Address of the Master clock
The granted repetition period for the sync message
The state of the communication with the master, possible values are:
 IDLE : The entry is not in use.
 INIT : Announce is sent to the master (Waiting for a response).
 CONN : The master has responded.
 SELL : The assigned master is selected as current master.
SYNC : The master is sending Sync messages.

Figure 4-18-1: PTP Status Page Screenshot
343
User's Manual of IGS-20040MT
Figure 4-18-2 appears.