Table of Contents
Advertisement
4.19.6 Ring Wizard Example:
The above topology often occurs on using ERPS protocol. The multi switch constitutes a single ERPS ring; all of the switches
only are configured as an ERPS in VLAN 3001, thereby constituting a single MRPP ring.
The scenario described as follows:
1.
Disable DHCP client and set proper static IP for Switch 1, 2 & 3. In this example, switch 1 is 192.168.0.101; switch 2 is
192.168.0.102 and switch 3 is 192.168.0.103.
2.
On switch 1, 2 & 3, disable spanning tree protocol to avoid confliction with ERPS.
Figure 4-19-6: Ring Example Diagram
Switch ID
Port
MEP ID
Port 1
Switch 1
Port 2
Port 1
Switch 2
Port 2
Port 1
Switch 3
Port 2
Table 4-2: ERPS Configuration Table
RPL Type
VLAN Group
1
None
2
Owner
4
None
3
Neighbour
6
None
5
None
355
User's Manual of IGS-20040MT
3001
3001
3001
3001
3001
3001
Advertisement
Table of Contents
