Ethernet Ring Protocol Switch Configuration - Planet IGS-20040MT User Manual

L2+ multi-port full gigabit managed ethernet switch

Hide thumbs Also See for IGS-20040MT:

Table of Contents

4.19.4 Ethernet Ring Protocol Switch Configuration

This page allows the user to inspect and configure the current ERPS Instance; screen in

Figure 4-19-4: Ethernet Ring Protocol Switch Configuration page screenshot

The page includes the following fields:

Instance Data:

 Port 0 SF MEP

 Port 1 SF MEP

 Port 0 APS MEP

 Port 1 APS MEP

Instance Configuration:

 Configuration

The ID of the Protection group.

See help on ERPS create WEB.

Type of Protecting ring. It can be either major ring or sub-ring.

Red: This ERPS is only created and has not yet been configured - is not active.

Green: This ERPS is configured - is active.

User's Manual of IGS-20040MT

Figure 4-19-4