Tftp Upgrade; Factory Default - Planet FGSW-2620VM User Manual

OObject
IP Address
Community Strings
Trap version
Add button
Remove button

4.1.5 TFTP Upgrade

It provides the functions to allow a user to update the switch firmware. Before updating, make sure you have your TFTP
server ready and the firmware image is on the TFTP server.
OObject
TFTP Server IP Address
Firmware File Name
Apply button

4.1.6 Factory Default

Reset Switch to default configuration, default value to as following configuration: Click
to default setting.
Description
Fill in the trap device IP.
The trap device community strings.
The Trap version.
Press the button to add the management SNMP community strings on the
Switch.
Press the button to remove the management SNMP community strings on
the Switch.
Figure 4-1-7 TFTP Update Firmware screentshot
Description
Fill in your TFTP server IP.
The name of firmware image.
Press the button for upgrade the switch firmware.
22
FGSW-2620VM User's Manual
button to reset switch