Planet IGS-20040MT User Manual page 342

 PCP
Clock current Data Set
Object
 stpRm
 Offset from master
 Mean Path Delay
Clock Parent Data Set
Object
 Parent Port Identity
 Port
 P Stat
 Var
 Change Rate
 Grand Master Identity
 Grand Master Clock
Quality
 Pri1
 Pri2
Servo Parameters
Object
 Display
 P-enable
 I-enable
 D-enable
Priority Code Point value used for PTP frames.
Description
Steps Removed : It is the number of PTP clocks traversed from the grandmaster
to the local slave clock.
Time difference between the master clock and the local slave clock, measured in
ns.
The mean propagation time for the link between the master and the local slave
Description
Clock identity for the parent clock, if the local clock is not a slave, the value is the
clocks own id.
Port Id for the parent master port
Parents Stats (always false).
It is observed parent offset scaled log variance
Observed Parent Clock Phase Change Rate. i.e. the slave clocks rate offset
compared to the master. (unit = ns per s).
Clock identity for the grand master clock, if the local clock is not a slave, the
value is the clocks own id.
The clock quality announced by the grand master (See description of Clock
Default DataSet:Clock Quality)
Clock priority 1 announced by the grand master
Clock priority 2 announced by the grand master
Description
If true then Offset From Master, MeanPathDelay and clockAdjustment are logged
on the debug terminal
If true the P part of the algorithm is included
If true the I part of the algorithm is included
If true the D part of the algorithm is included
342
User's Manual of IGS-20040MT