Factory Default - Planet GSW-2400HPS User Manual

4.6.2 Factory Default

This function provides reset configuration of Web Smart Switch to factory default mode. The factory default screens in
4-6-11 & Figure 4-6-12 appear.
Button
After the "Factory Default" button is pressed, the system will load the default IP address settings as follows:
。
Default IP Address: 192.168.0.100
。
Subnet Mask: 255.255.255.0
。
Default Gateway: 192.168.0.254
Figure 4-6-11: Factory Default Page Screenshot
: Click to reset the configuration to factory default mode.
Figure 4-6-12: Factory Default Page Screenshot
User's Manual of GSW-2400HPS
78
Figure