Table of Contents
Advertisement
Power Consumption
Layer 2 Functions
Basic Management Interfaces
Secure Management Interface
Port Configuration
Port Status
Port Mirroring
VLAN
Link Aggregation
QoS
IGMP Snooping
MLD Snooping
Access Control List
Bandwidth Control
SNMP MIBs
24V AC
8 watts / 27BTU (System on)
17 watts / 57BTU (Full loading)
Web browser, Remote Telnet, SNMPv1, v2c, local console
SSH, SSL, SNMPv3
Port disable/enable
Auto-negotiation 10/100/1000Mbps full and half duplex mode selection
Flow Control disable / enable
Power saving mode control
Display each port's speed duplex mode, link status, Flow control
status. Auto negotiation status, trunk status.
TX / RX / Both
Many to 1 monitor
802.1Q tagged-based VLAN, up to 255 VLAN groups
Q-in-Q tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN groups, out of 4095 VLAN IDs
IEEE 802.3ad LACP / Static Trunk
Support 10 groups of 8-Port trunk support
Traffic classification based, strict priority and WRR
8-level priority for switching
- Port Number
- 802.1p priority
- 802.1Q VLAN tag
- DSCP/TOS field in IP Packet
IGMP (v1/v2/v3) Snooping, up to 255 multicast Groups
IGMP Querier mode support
MLD (v1/v2) Snooping, up to 255 multicast Groups
MLD Querier mode support
IP-Based ACL / MAC-based ACL
Up to 256 entries
Per port bandwidth control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
RFC-1213 MIB-II
IF-MIB
RFC 1493 Bridge MIB
RFC 1643 Ethernet MIB
20
User's Manual of IGS-20040MT
RFC 2737 Entity MIB
RFC 2618 RADIUS Client MIB
RFC 2933 IGMP-STD-MIB
RFC 3411 SNMP-Frameworks-MIB
Advertisement
Table of Contents
