Din-Rail Mounting - Planet IGS-20040MT User Manual

L2+ multi-port full gigabit managed ethernet switch

Hide thumbs Also See for IGS-20040MT:

Table of Contents

User's Manual of IGS-20040MT

2.2.2 DIN-Rail Mounting

This section describes how to install the Industrial Managed Switch. There are two methods to install the Industrial Managed

Switch -- DIN-rail mounting and wall-mount plate mounting. Please read the following topics and perform the procedures in the

order being presented.

Follow all the DIN-rail installation steps as shown in the example.

Step 1: Screw the DIN-rail on the Industrial Managed Switch.

Step 2: Lightly slide the DIN-rail into the track.