Planet IGS-20040MT User Manual page 56

L2+ multi-port full gigabit managed ethernet switch
Hide thumbs Also See for IGS-20040MT:
Table of Contents

Advertisement

DNS Server
DNS Proxy
IP Address
Delete
VLAN
IPv4
DHCP
IPv4
IPv6
IP Routes
Delete
Network
Mask Length
Gateway
This setting controls the DNS name resolution done by the switch. The
following modes are supported:
 From any DHCP interfaces
The first DNS server offered from a DHCP lease to a DHCP-enabled
interface will be used.
 No DNS server
No DNS server will be used.
 Configured
Explicitly provide the IP address of the DNS Server in dotted decimal
notation.
 From this DHCP interface
Specify from which DHCP-enabled interface a provided DNS server
should be preferred.
When DNS proxy is enabled, system will relay DNS requests to the
currently configured DNS server, and reply as a DNS resolver to the client
devices on the network.
Select this option to delete an existing IP interface.
The VLAN associated with the IP interface. Only ports in this VLAN will be
able to access the IP interface. This field is only available for input when
creating an new interface.
Enable the DHCP client by checking this box.
Enabled
The number of seconds for trying to obtain a DHCP lease.
Fallback
For DHCP interfaces with an active lease, this column show the current
Current Lease
interface address, as provided by the DHCP server.
Provide the IP address of this Industrial Managed Switch in dotted
Address
decimal notation.
The IPv4 network mask, in number of bits (prefix length). Valid values are
Mask Length
between 0 and 30 bits for a IPv4 address.
Provide the IP address of this Industrial Managed Switch. A IPv6 address
Address
is in 128-bit records represented as eight fields of up to four hexadecimal
digits with a colon separating each field (:).
The IPv6 network mask, in number of bits (prefix length). Valid values are
Mask Length
between 1 and 128 bits for a IPv6 address.
Select this option to delete an existing IP route.
The destination IP network or host address of this route. Valid format is
dotted decimal notationor a valid IPv6 notation. A default route can use
the value 0.0.0.0or IPv6 :: notation.
The destination IP network or host mask, in number of bits (prefix length).
The IP address of the IP gateway. Valid format is dotted decimal notation
or a valid IPv6 notation. Gateway and Network must be of the same type.
56
User's Manual of IGS-20040MT

Advertisement

Table of Contents
loading

Table of Contents