Table of Contents
Advertisement
4.10.4 ACL Ports Configuration
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
The Page includes the following fields:
Object
Port
Policy ID
Action
Rate Limiter ID
EVC Policer
EVC Policer ID
Port Redirect
Figure 4-10-4: ACL Ports Configuration Page Screenshot
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select whether EVC policer is enabled or disabled. The default value is
"Disabled". Note that ACL rate limiter and EVC policer can not both be enabled.
Select which EVC policer ID to apply on this port. The allowed values are
Disabled or the values 1 through 256.
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
232
User's Manual of IGS-20040MT
Figure 4-10-4
appears.
Advertisement
Table of Contents
