Resetting The Total Distance Meter; Resetting The Navigator; Resetting To Factory Settings (Ac Button); Operation Mode Selection - VDO Z Series Instruction Manual

EN
Automatic return to the operation mode for TOTAL TIME
Reset total time done

9.3. RESETTING THE TOTAL DISTANCE METER

ATTENTION: When resetting the total distance the following data is
deleted:
- Total distance
- Total distance bike 1
- Total distance bike 2
3 sec. √ TRIP DATA ?RESET?
∂ ƒ ODOTOTAL ?RESET?
‚ ODOTOTAL ?RESET? <<?RESET?>> flashing
‚ ODOTOTAL RESET DONE
Automatic return to the operation mode for ODOTOTAL
Odototal reset done

9.4. RESETTING THE NAVIGATOR

Please see the detailed description of Navigator functions in chapter
12.1.-12.2. There you will learn more about use of this reset
3 sec. √ TRIP DATA ?RESET?
∂ ƒ NAVIGATOR ?RESET?
‚ NAVIGATOR ?RESET? <<?RESET?>> flashes
‚ NAVIGATOR RESET DONE
Automatic return to the operation mode for NAVIGATOR
Navigator reset done
24
9.5. RESETTING TO FACTORY SETTINGS
WARNING: When resetting to factory settings all ride data and all com-
puter settings will be reset, including the personal data. Only perform
this reset if a software malfunction occurs or if your computer can no
longer be operated.
step 1 Use a sharp pencil
step 2 Press the AC button on the back of the computer for 2 sec
Reset to factory settings done.

10. OPERATION MODE SELECTION

Your VDO computer uses different measuring and analysis programs for
different sport types. Certain functions are not available depending on
the selected mode. For this reason you must select one of the following
modes prior to starting your exercise:
- Cycle mode ¬
- Walk mode £ (also for jogging, running, Nordic walking,
inline skating)
Select operation mode:
3 sec. ç Setting mode LANGUAGE SELECT
∂ ƒ OP MODE SELECT
‚ CYCLE MODE ?SET OK?
∂ to change to WALK MODE ?SET OK?
‚ Automatic return to the operation mode for TRIP DIST
(in cycle mode), or ALTI UP (in walk mode)