Selecting The Timing Function; Setting The Timer - VDO Z Series Instruction Manual

INSTRUCTION MANUAL
- Duration of the lap
- Average heart rate on the lap
- Average speed on the lap
The lap values can be called at any time if time measurement is
stopped.
STOPWATCH: With the manual stopwatch you can manually capture the
plus values of training units.

13.1. SELECTING THE TIMING FUNCTION

3 sec. ç Setting mode LANGUAGE SELECT
∂ ƒ TIMER SETTINGS
‚ TIMER ?SELECT?
Select ‚ TIMER 1 ?SELECT?
Timer ∂ TIMER 2 ?SELECT?
TIMER 1 + 2 ?SELECT ? >>> Query repeats TIMER
∂
1 + 2 REPEATS ?SELECT?
∂ COUNTDOWN ?SELECT?
∂ LAP TIMER ?SELECT?
∂ STOP WATCH ?SELECT?
‚ Confirm selection SET DONE
If you have not yet set any values for timer 1, timer 2, timer 1 +2, or
countdown, then your VDO computer will now show ERROR in the
display. In this case proceed as explained in the following chapter 13.2

Setting the timer.

13.2. SETTING THE TIMER (when selecting timer 1 or timer 2 or timer
1+2)
Setting times for timer 1/timer 2
3 sec. ç Setting mode LANGUAGE SELECT
∂ ƒ TIMER SETTINGS
‚ TIMER ?SELECT?
∂ TIMER ?SET?
‚ TIMER 1 ?SET?
∂ TIMER 2 ?SET?
Select ‚ TIMER ?SET?
‚ SET HOUR ?CONTINUE?
∂ ƒ Setting hours (keep button depressed for fast run-
through)
‚ SET MINUTES ?CONTINUE?
∂ ƒ Setting minutes (keep button depressed for fast run-
through)
‚ SET SECONDS ?CONTINUE?
∂ ƒ Setting seconds (keep button depressed for fast run-
through)
‚ TIMER ?SET OK?
‚ TIMER SET DONE
Automatic return to the operation mode for TIMER 1/2. If you have not
yet set any values for timer 1, and/or timer 2, then your VDO computer
will now show ERROR in the display.
33