Transferring Data To Your Pc; Selection Of The Recording Interval - VDO Z Series Instruction Manual

EN

15.2. TRANSFERRING DATA TO YOUR PC

Install the PC-Sport software on your PC. Insert your VDO computer into
the docking station as shown (Fig. xxx) and connect the USB cable to
one of your computer's USB ports. Now start PC Sport
- Under „FILE" select Import
- In Import select VDO series Z
Click on the Start button in the PC Sport program, then on the Z3 go to
setting mode
3 sec. ç Setting mode LANGUAGE SELECT
∂ ƒ PC LINK SELECT
‚ PC LINK SENDING (the data transfer is indicated in
the display by changing numbers)
Now the PC receives the data of your VDO computer. Data transfer is
indicated by the changing numbers in the computer's display.
NOTE: When importing the files the PC-Sport program detects which
files have already been imported. If you want to import this again you
must select it manually and confirm a warning query.
Now follow the instructions on saving files in the PC-Sport program.
Please see the PC Sport electronic user manual on the CD-ROM for all
additional information relative to planning and analysis of training units

15.3. SELECTION OF THE RECORDING INTERVAL

Your VDO computer offers two recording intervals (10 seconds or 20
seconds) for data recording.
Interval 1:
Maximum recording period:
Selection of the recording interval:
40
>>> P11
20 seconds
100 hours
Press ¥ + √
Interval 2:
Maximum recording period:
Selection of the recording interval:
Now the recording interval that has been set is shown in the display:
DATA RECORD
INTERVAL
10 SEC
20 SEC
∂ ƒ UP/Down - changes to the other interval.
‚ Press M to confirm your selection.
ATTENTION: It is not possible to switch the recording interval during a
recording.
10 seconds
50 hours
Press ¥ + √