Reset Mode; Reset Total Ride Time - VDO Z Series Instruction Manual

INSTRUCTION MANUAL
∂ ƒ ALTI DOWN SET
‚ ALTI DOWN 1 SET (for bike 2 or
walking ƒ ALTI DOWN 2 SET / WALK DOWN SET)
‚ ALTI DOWN 1 NEXT DIGIT / ALTI DOWN 2 NEXT DIGIT
/ WALK DOWN NEXT DIGIT
∂ ƒ Set last digit (keep button depressed for fast
run-through)
‚ ... repeat for all digits from back to front
‚ ALTI DOWN 1 ?SET OK? / ALTI DOWN 2
?SET OK? / WALK DOWN ?SET OK?
∂ ƒ Setting the first digit
‚ ALTI DOWN 1 SET DONE / ALTI DOWN 2 SET DONE /
WALK DOWN SET DONE
Automatic return to the operation mode for TOTAL DOWN
Annual downhill altitude loss set done

9. RESET MODE

In reset mode of your VDO computer you reset the saved ride data of
the bicycle computer. You can also reset the computer to the factory
settings
9.1 TRIP DATA
ATTENTION: When resetting the trip data the following day trip data will
be deleted:
- Daily distance
- Trip ride time
- Average speed
- Maximum speed
- Uphill altitude gain
- Downhill distance
- Maximum trip altitude
- Average ascending gradient
- Maximum ascending gradient
- Downhill altitude loss
- Downhill distance
- Average descending gradient
- Maximum descending gradient
If the cadence option is mounted then the cadence data will also be
reset.
- Average cadence
- Maximum cadence
3 sec. √ TRIP DATA ?RESET?
‚ TRIP DATA ?RESET? <<?RESET?>> flashing
‚ TRIP DATA RESET DONE
Automatic return to operation mode for TRIP DIST

9.2 RESET TOTAL RIDE TIME

ATTENTION: When resetting total ride time the following data is deleted:
- Total ride time
- Total ride time bike 1
- Total ride time bike 2
3 sec. √ TRIP DATA ?RESET?
∂ ƒ TOTAL TIME ?RESET?
‚ TOTAL TIME ?RESET? <<?RESET?>> flashing
‚ TOTAL TIME RESET DONE?
23