VDO Z Series Instruction Manual page 52

INSTRUCTION MANUAL
No pulse display (dash in the
display)
No average pulse
No maximum pulse
No pulse percentage of the
personal maximum pulse
No data relative to training times
is in the set training ranges
Calorie display does not function
Watt display does not function
The receive channel for pulse is
switched off (a 15-minute period
has elapsed without receiving
pulse data)
Press buttons ¥ ç at the
+
same time
Timer has not been started
Start timer
Timer has not been started
Start timer
Personal data has not been set,
timer has not been started
Timer has not been started.
Start timer
Personal data has not been set,
timer has not been started
- Personal data has not been set
- Watt settings have not been
made
- Cadence transmitter is not
installed
- Cadence transmitter does not
function
LAP data cannot be displayed/
are no longer present
Screwdriver is flashing on the
display
Walking shoe is shown in the
display (bicycle distance data is
no longer displayed) £
The timer indicator is flashing
Bell icon is displayed
The LAP icon is flashing
The REC icon is flashing
The LAP data have been deleted
prior to LAP RECALL
Service interval for your bicycle
is displayed. Take your bicycle
in for service or perform the
service yourself
Walk mode is switched on.
In walk mode certain bike
functions are not available
A timer is still running.
An alarm is set (alarm time)
A LAP recording is still running.
End recording with the ∫
button
Data recording is running. All
data is recorded in the computer
and can be transferred later to
the PC.
End data recording with button
≈ ç
+
43