Related Manuals for VDO M1.1 WL
Summary of Contents for VDO M1.1 WL
- Page 1 M1.1 WL Installation video Operating video Settings video www.vdocyclecomputing.com/service...
-
Page 2: Table Of Contents
M1.1 WL Preface Congratulations In choosing a VDO computer, you have opted for high-quality device with first rate technology. To optimally use the computer, we recommend that you read this manual carefully. It contains full operating instructions and many useful tips. -
Page 3: Display
M1.1 WL Display The VDO M1.1 WL has a large, easy-to-read display that can be divided into three areas. – The top line of the display permanently indicates the current speed. If the 12-hour clock format has been selected, “am” or “pm” appears next to the speed. -
Page 4: Functions
M1.1 WL Functions The VDO M1.1 WL has the following functions Current speed With a wheel circumference of 2,155 mm, the maximum possible speed is 199 kmh or 124 mph. Current distance The current distance counts up to 999.99 km or miles. -
Page 5: Operation While Cycling
By pressing the SET button you can also scroll backwards through the functions. BIKE Wireless transmission of the speed The VDO M1.1 WL comes with analogue wireless transmis- Note: LED front lights can interfere with analogue wireless sion. transmission. -
Page 6: Attaching The Handlebar Bracket
M1.1 WL Attaching the handlebar bracket You can attach the computer to the right or left of the handle- bars or the centre of the stem. Attach the handlebar bracket – in the corresponding position. STEP 1 Decide whether you want to attach the computer to the handlebars or the stem. -
Page 7: Attaching The Speed Transmitter
STEP 2 90° – 45° Place the spoke magnet around an outside spoke. The VDO logo of the rod-shaped magnet core should point toward the ✔ transmitter. Align the magnet with the cross-hatched sensor marking on the transmitter at a distance of 1- 5 mm. -
Page 8: Inserting The Computer Into The Bracket
M1.1 WL Inserting the computer into the bracket The VDO twist-click system securely connects the computer to the handlebar bracket. LOCK How to insert the computer: STEP 1 Place the computer into the bracket in a 10 o’clock position. UNLOCK STEP 2 Rotate the computer to the right into the 12 o’clock position... -
Page 9: Sleep Mode And Wireless Receiver
M1.1 WL Sleep mode and wireless receiver If you take a break and the M1.1 WL is still in the handle- bar bracket the computer switches to standby mode after five minutes. The wireless receiver is still ON. This can be seen from the flashing antenna icon. -
Page 10: Settings
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M1.1 WL returns to function mode. -
Page 11: Wheel Circumference
M1.1 WL Settings – wheel circumference You can set the roll circumference of your wheel on the VDO M1.1 WL. Wheel Wheel The more accurate this setting, the more accurate your speed circumference circumference indicator and the measurement of the distance you have... - Page 12 M1.1 WL Settings – wheel circumference How to set your wheel circumference: Press and hold the SET button until the settings menu opens. “Language” appears on the display. Press the BIKE button to scroll to the setting for the wheel circumference.
- Page 13 If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M1.1 WL returns to function mode.
-
Page 14: Unit
If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M1.1 WL returns to function mode. -
Page 15: Clock
M1.1 WL Settings – clock In the VDO M1.1 WL, you can set the clock in 12-hour AM/PM format or 24-hour format. Press and hold the SET button until the settings menu opens. “Language” appears on the display. Press the BIKE button to scroll to the setting for the clock. - Page 16 If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any further settings, press and hold the SET button. The settings menu closes. The VDO M1.1 WL returns to function mode.
- Page 17 If you want to configure further settings, press the BIKE button to access these. If you do not want to configure any other settings, press and hold the SET button. The settings menu closes. The VDO M1.1 WL returns to function mode.
-
Page 18: Total Distance
M1.1 WL Settings – setting the total distance You can set the total distance ridden on the VDO M1.1 WL. For example, you can enter your data here at the start of a new cycling season. ATTENTION: the M1.1 WL has a data memory. -
Page 19: Resetting Trip Data After The Trip
M1.1 WL Resetting trip data after the trip After each trip, you can reset the data for this trip to zero. The VDO M1.1 WL is then ready for the next trip. ATTENTION: your total distance (total number of kilometres ridden) is not reset to zero. -
Page 20: Battery Status Indicator
M1.1 WL Low battery indicator The M1.1 WL has a low battery warning. The text “Computer low” appears on the display. Press the BIKE button to acknowledge this low battery warning. You can keep using the cycle computer for approx. a week. -
Page 21: Replacing The Battery In The Transmitter
M1.1 WL Replacing the battery in the speed transmitter The battery in the speed transmitter should be replaced annually to guarantee seamless wireless transmission. You need a 3 V 2032 battery. We recommend using a branded battery from Sony, Panasonic, Varta or Duracell. -
Page 22: Terms Of Guarantee
M1.1 WL Terms of guarantee VDO Cycle Parts offers a two-year guarantee on your VDO If your complaint is legitimate, you will receive a comparable computer, starting from the date of purchase. This replacement device. You are not entitled to a replacement of... -
Page 23: Troubleshooting
M1.1 WL Troubleshooting Error Possible cause Correction Half segments on the display Computer software not running Remove and re-insert the battery (e.g. after a battery change) correctly after battery change No speed displayed Distance from sensor to magnet too Correct the sensor and magnet positions... - Page 24 The declaration of conformity can be viewed at: Neustadt/Weinstraße, declare that when used as intended, www.vdocyclecomputing.com. the VDO cycle computers with wireless transmission VDO M1.1 WL and the A1 transmitter comply with the essential requirements established in Article 3 of the R&TTE Directive 1999/5/EC. Neustadt, October 2013 FCC-Addendum This device complies with part 15 of the FCC Rules.
- Page 25 Cycle Parts GmbH Le Quartier Hornbach 13 67433 Neustadt/Weinstrasse (Germany) +49 (0) 63 21- 95 82 7 - 0 www.vdocyclecomputing.com...