Applying Postage; Using The Weighing Platform (Scale) - Pitney Bowes DM100i Operator's Manual

Hide thumbs Also See for DM100i:
Table of Contents

Advertisement

Applying Postage

Using the Weighing Platform (Scale)

1. Make sure scale is activated (you will see "0lb. and 0.0 oz" next
to the "Scale" on the display). See Chapter 7, System Options to
turn your scale on if necessary.
2. Place mail piece on scale. The weight of the mail piece will ap-
pear on the top-line of the display and valid classes and rates for
this weight are displayed.
◄1st Class
◄Priority
◄Pkg Service
3. Select the desired class by pressing the key next to the class
name (use the scroll keys to see additional classes).
NOTE:
i
mail piece, call your local post offi ce or visit www.usps.com.
4. If there is no value next to the class name, more information is
needed. Follow the prompts for the options and/or services avail-
able for this class of service. The last screen shows "Services"
and lists special services such as COD and Insurance.
5. Select "Done" when finished entering all the class options and fees.
6. If using the moistener, place flap
along moistener and move towards
the right.
7. Place the envelope up against the
registration wall of the sys tem and
slide it to the right until the sys tem
grasps it. The system prints the me-
ter stamp and ejects the envelope/
tape sheet.
SV62276 Rev. C
0 lb 2.3 oz
$2.67
$3.85
If you are unsure if a particular class is valid for your
3 • Running Mail
3-5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dm225Dm125Dm200l

Table of Contents