2C-6
CHASSIS SHEET METAL
Fig. 2C-12--Lower Radiator Grille - G Models
Fig. 2C-11--Typical Carburetor A ir Inlet Snorkel - CK Model
FRONT SHEET METAL - CK MODEL
Shim s which are found a t various locations should be
recorded to ease installation of sheet m etal assembly.
Rem oval
1. Remove bolts at hood hinge and link. Remove hood
assembly.
CK-MODEL
[
|
]
v i e w
a
Fig. 2C-14-- Grille Moldings - CK, G Models
Fig. 2C -13-G rille Panel or Brackets