Step 5.1 - 2Print Beta Beta Prusa V2 Deluxe EasyBuild Assembly Instructions Manual

Assembly Instructions Beta Prusa V2 Deluxe - EasyBuild 12/10/12

Step 5.1

Needed parts for step 5.1
The following parts are needed for this step:
3x Optical end-stop
2x curved end-stop holder
1x straight end-stop holder
1x flag
3x Screw M3 x 20 mm
3x Screw M3 x 16 mm
8x Washer M3
4x Nut M3
and the structure of the previous steps
Assembly of the optical end-stop on the Y-axis
Attach the optical end-stop to the outer hole of a curved end-stop holder with a M3 x 16
screw, washers on both sides and a nut. Mount the end-stop holder on the outer rod of the
Page 37/ 53