2Print Beta Beta Prusa V2 Deluxe EasyBuild Assembly Instructions Manual page 20

Assembly Instructions Beta Prusa V2 Deluxe - EasyBuild 12/10/12
Step 2.4
Needed parts for step 2.4
The following parts are needed for this step:
1x pre-assembled X-carriage
2x Smooth rod 8mm x 420 mm
and the structure from the previous steps
Assembly step 2.4
Slide the pre-assembled x-carriage onto the smooth rods and push them through both x end
parts, like its shown in the picture above.
Page 20/ 53