Chapter 8 Installing Options; Installing The Cut Sheet Feeder - Fujitsu DL7400 User Manual

INSTALLING THE
CUT SHEET
FEEDER
User's Manual
CHAPTER 8 INSTALLING OPTIONS
INSTALLING OPTIONS
The installaion of options allows you to expand
the capabilities of your printer. Options available
for the printer include:
•
LAN card
•
Cut sheet feeder
•
Tractor unit
•
Large stacker
•
Large Paper Table
The LAN card is a user installable option, but can be installed only on a
printer model with the parallel and USB interfaces. For information on
the installation procedure, refer to the manual that comes with the LAN
card.
Options can be purchased from your dealer. Order numbers for options
are given in Appendix A.
This chapter describes what to do after installing cut sheet feeder.
A cut sheet feeder (SF940) allows you to automatically feed single sheets.
It can be mounted on the front or the rear of the printer.
When attaching the cut sheet feeder to the front of the printer, remove the
tractor
For both front and rear, the cut sheet feeder can handle a max. of 5-ply
multipart media.
When installing the front and rear cut sheet feeders, the printer assigns
the first bin to the front feeder. You can change the assignment using set
up mode.
WARNING
Electric Before mounting or
shock removing the cut sheet
feeder, turn off the power
switches of the personal
computer and the printer
and remove the power plug
from the outlet.
Otherwise, you may
receive electric shock.
8
8-1